1. The Washing Machine Won’t Start
- Ensure the power cord is properly plugged in.
- Check for a tripped circuit breaker.
- Inspect the control panel for loose wiring.
- Reset the washing machine by unplugging it for a few minutes.
2. Water Not Draining Properly
- Clean the drain filter to remove lint or debris.
- Check for blockages in the drain hose.
- Inspect the drain pump for faults.
- Make sure the drainage pipe is installed correctly.
3. Excessive Noise During Operation
- Remove any objects stuck in the drum.
- Ensure the machine is placed on a level surface.
- Tighten any loose bolts or screws.
4. Machine Vibrating Too Much
- Balance the washing machine on an even surface.
- Avoid overloading the drum with clothes.
- Check for worn-out shock absorbers.
- Inspect and replace damaged suspension springs.
5. Spin Cycle Not Working Properly
- Ensure the correct spin settings are selected.
- Inspect the drive belt and motor coupling.
- Check the lid switch or door lock mechanism.
- Look for any error codes on the display panel.
6. Water Leaking from the Machine
- Inspect hoses for cracks or loose fittings.
- Clean the detergent drawer to remove clogs.
- Check the rubber door seal for dirt & debris.
- Ensure the water pump is not leaking.
7. Clothes Not Getting Cleaned Properly
- Use the right type and amount of detergent.
- Do not overload the washing machine.
- Check for drum movement during the wash cycle.
- Clean the filter and detergent tray.
8. Machine Stops Mid-Cycle
- Check for power supply interruptions.
- Inspect the control board and timer.
- Ensure the door is fully closed.
- Reset the machine and try running the cycle again.
9. Bad Smell from the Washing Machine
- Run a cleaning cycle with hot water and vinegar.
- Wipe down the detergent drawer and rubber gasket.
- Leave the door open after use to allow ventilation.
- Remove and clean the lint filter frequently.
10. Display Panel Showing Error Codes
- Refer to the user manual for error code meanings.
- Try resetting the machine by unplugging it.
- Inspect sensors and wiring for faults.
- Contact HouseTriangle for professional repair services.